HP 3600 v2 Series Command Reference Manual page 221

Description
Use display ip multicast routing-table to display the multicast BGP routing table.
All the active MBGP routes in the MBGP routing table are used for RPF check, but inactive MBGP routes
are not.
Examples
# Display brief information about the active routes in the multicast BGP routing table.
<Sysname> display ip multicast routing-table
Routing Tables: Public
Destinations : 6
Destination/Mask
2.2.2.0/24
2.2.2.1/32
127.0.0.0/8
127.0.0.1/32
192.168.80.0/24
192.168.80.10/32
Table 43 Command output
Field
Destinations
Routes
Destination/Mask
Proto
Pre
Cost
Nexthop
Interface
# Display the detailed information of the multicast routing table.
<Sysname> display ip multicast routing-table verbose
Routing Table : Public
Destinations : 2
Destination: 192.168.80.0/24
Protocol: Direct
Preference: 0
IpPrecedence:
NextHop: 192.168.80.10
BkNextHop: 0.0.0.0
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
State: Active Adv
Proto Pre
Direct 0
Direct 0
Direct 0
Direct 0
Direct 0
Direct 0
Tag: 0
Routes : 6
Cost NextHop
0 2.2.2.1
0 127.0.0.1
0 127.0.0.1
0 127.0.0.1
0 192.168.80.10
0 127.0.0.1
Description
Number of destinations
Number of routes
Destination address/mask length
Routing protocol that discovered the route
Route preference
Route cost
Next hop of the route
Outgoing interface to reach the destination
Routes : 2
Process ID: 0
Cost: 0
QosLcId:
Interface: Vlan-interface1
BkInterface:
Neighbour: 0.0.0.0
Label: NULL
Age: 00h14m49s
208
Interface
Vlan-interface2
InLoop0
InLoop0
InLoop0
Vlan-interface1
InLoop0