HP 3600 v2 Series Command Reference Manual page 324

View
User view
Default level
2: System level
Parameters
ipv6-source-address: Specifies an IPv6 multicast source address.
ipv6-group-address: Specifies an IPv6 multicast group address, in the range of FFxy::/16, where x and
y represent any hexadecimal number from 0 to F.
prefix-length: Specifies the prefix length of an IPv6 multicast group address or an IPv6 multicast source
address. For an IPv6 multicast group address, the value ranges from 8 to 128. For an IPv6 multicast
source address, the value ranges from 0 to 128. The default is 128 in both cases.
incoming-interface: Specifies the IPv6 multicast routing entries whose incoming interface is the specified
one.
interface-type interface-number: Specifies an interface by its type and number.
register: Specifies a register interface.
all: Specifies all IPv6 multicast routing entries.
Description
Use reset multicast ipv6 routing-table to remove IPv6 multicast routing entries.
When an IPv6 multicast routing entry is removed, the associated IPv6 multicast forwarding entry is also
removed.
Related commands: display multicast ipv6 forwarding-table, display multicast ipv6 routing-table, and
reset multicast ipv6 forwarding-table.
Examples
# Remove the IPv6 multicast routing entry for the IPv6 multicast group FF03::101.
<Sysname> reset multicast ipv6 routing-table ff03::101
311