Display Bgp Multicast Paths - HP 3600 v2 Series Command Reference Manual

Examples
# Display IPv4 MBGP routing information advertised with the network command.
<Sysname> display bgp multicast network
BGP Local Router ID is 10.1.4.2.
Local AS Number is 400.
Network
100.1.2.0
100.1.1.0
Table 46 Command output
Field
BGP Local Router ID
Local AS Number
Network
Mask
Route-policy
Short-cut

display bgp multicast paths

Syntax
display bgp multicast paths [ as-regular-expression | | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: Monitor level
Parameters
as-regular-expression: Specifies an AS path regular expression, a case-sensitive string of 1 to 80
characters, including spaces.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp multicast paths to display the AS path information of IPv4 MBGP routes.
Examples
# Display the AS path information of IPv4 MBGP routes.
Mask Route-policy
255.255.255.0
255.255.255.0
Description
BGP local router ID
Local AS number
Network address
Mask
Routing policy referenced
Shortcut route
214
Short-cut
Short-cut