Peer Reflect-Client (Mbgp Address Family View) - HP 3600 v2 Series Command Reference Manual

Examples
# In IPv4 MBGP address family view, disable updates sent to the peer group test from carrying private
AS numbers.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] group test external
[Sysname-bgp] peer test as-number 200
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] peer test enable
[Sysname-bgp-af-mul] peer test public-as-only

peer reflect-client (MBGP address family view)

Syntax
peer { group-name | peer-address } reflect-client
undo peer { group-name | peer-address } reflect-client
View
IPv4 MBGP address family view
Default level
2: System level
Parameters
group-name: Specifies an IPv4 MBGP peer group by its name, a string of 1 to 47 characters.
peer-address: IP address of an IPv4 MBGP peer.
Description
Use peer reflect-client to configure the router as a route reflector and specify a peer or a peer group as
a client.
Use undo peer reflect-client to remove the configuration.
By default, neither the route reflector nor the client is configured.
Related commands: reflect between-clients and reflect cluster-id.
Examples
# In IPv4 MBGP address family view, configure the local device as a route reflector and specify the iBGP
peer group test as a client.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] group test internal
[Sysname-bgp] peer test as-number 100
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] peer test enable
[Sysname-bgp-af-mul] peer test reflect-client
245