HP 3600 v2 Series Command Reference Manual page 427

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp ipv6 multicast group to display IPv6 MBGP peer group information.
If no ipv6-group-name is specified, information about all peer groups is displayed.
Examples
# Display information about the IPv6 MBGP peer group aaa.
<Sysname> display bgp ipv6 multicast group aaa
BGP peer-group is aaa
remote AS number not specified
Type : external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 0
No routing policy is configured
Members:
Peer
20:20::20:1
Table 89 Command output
Field
BGP peer-group
remote AS
Type
Maximum allowed prefix number
Threshold
Configured hold timer value
Keepalive timer value
Minimum time between advertisement runs
Route refresh capability has been enabled
ORF advertise capability based on prefix (type 64):
Local: both
AS MsgRcvd MsgSent
200 170
OutQ PrefRcv Up/Down
141 0 2 02:13:35 Established
Description
Name of the IPv6 MBGP peer group.
AS number of the IPv6 MBGP peer group.
Type of the IPv6 MBGP peer group.
Maximum number of prefixes allowed to be received
from the IPv6 MBGP peer group.
Threshold value.
Hold-timer value.
Keepalive interval.
Minimum interval for route advertisement.
The route-refresh capability has been enabled.
The BGP peer supports the ORF capability based on IP
prefix. The capability value is 64.
The local BGP router supports both the ORF sending
and receiving capabilities.
414
State