Pim Sm; Pim State-Refresh-Capable - HP 3600 v2 Series Command Reference Manual

pim sm

Syntax
pim sm
undo pim sm
View
Interface view
Default level
2: System level
Parameters
None
Description
Use pim sm to enable PIM-SM.
Use undo pim sm to disable PIM-SM.
By default, PIM-SM is disabled.
This command takes effect only after IP multicast routing is enabled in the corresponding instance.
Related commands: multicast routing-enable and pim dm.
Examples
# Enable IP multicast routing in the public network, and enable PIM-SM on VLAN-interface 100.
<Sysname> system-view
[Sysname] multicast routing-enable
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim sm

pim state-refresh-capable

Syntax
pim state-refresh-capable
undo pim state-refresh-capable
View
Interface view
Default level
2: System level
Parameters
None
Description
Use pim state-refresh-capable to enable the state refresh feature on the interface.
Use undo pim state-refresh-capable to disable the state refresh feature.
160