View And Configure The Switch Management Settings; View Or Define System Information And View Software Versions - NETGEAR ProSafe XS728T User Manual

ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual

View and Configure the Switch Management Settings

This section describes how to display the switch status and specify some basic switch
information, such as the management interface IP address, system clock settings, and DNS
information. From the System > Management menu, you can access pages that are
described in the following sections:
•

View or Define System Information and View Software Versions

• View the System CPU Status
• View USB Device Information
• IP Configuration on page 34
• IPv6 Network Configuration
• View the IPv6 Network Neighbor
• Configure the Time Settings
• Configure DNS Settings
• Configure Green Ethernet Settings
View or Define System Information and View Software
Versions
When you log in, the System Information page displays. Use this page to configure and view
general device information such as system name, location, and contact, general system
temperature, temperatures of the fans, and boot and software versions.

To view or define system information and view software versions:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
on page 32
on page 33
on page 36
on page 37
on page 38
on page 48
on page 52
Configure System Information
30
on page 30
Change the Default IP Address of the