Display Link-Aggregation Summary - HP 3100 v2 Series Command Reference Manual

Table 17 Command output
Field
Flags
Aggregation Interface
Local
Port Priority
Oper-key
Flag
Remote
System ID
Received LACP Packets
Illegal
Sent LACP Packets

display link-aggregation summary

Syntax
display link-aggregation summary [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display link-aggregation summary to display the summary information for all aggregation
groups.
Description
LACP state flags:
•
A—LACP is enabled.
•
B—Indicates the LACP short timeout.
•
C—The sending system detects that the link is aggregatable.
•
D—The sending system detects that the link is synchronized.
•
E—The sending system detects that the incoming frames are collected.
•
F—The sending system detects that the outgoing frames are distributed.
•
G—The sending system receives frames in the default state.
•
H—The sending system receives frames in the expired state.
Aggregate interface to which the member port belongs.
Information about the local end.
Aggregation priority of the port.
Operational key.
LACP protocol state flag.
Information about the remote end.
Remote end system ID, comprising the system LACP priority and the system
MAC address.
Total number of LACP packets received.
Total number of illegal packets.
Total number of LACP packets sent.
70