Group-Member; Interface - HP 3100 v2 Series Command Reference Manual

group-member

Syntax
group-member interface-list
undo group-member interface-list
View
Port group view
Default level
2: System level
Parameters
interface-list: Specifies an Ethernet interface list, in the form of interface-type interface-number [ to
interface-type interface-number ] &<1-10>, where &<1-10> indicates that you can specify up to 10
interfaces or interface ranges.
Description
Use group-member to assign Ethernet interfaces to a port group.
Use undo group-member to remove Ethernet interfaces from the port group.
By default, a port group does not contain any member ports.
If you use
interface-end-number command to add multiple ports in batch to the specified port group, make sure
that the interface-end-number argument must be greater than the interface-start-number argument.
Examples
# Assign Ethernet interface Ethernet 1/0/1 to the port group named group1.
<Sysname> system-view
[Sysname] port-group manual group1
[Sysname-port-group-manual-group1] group-member ethernet 1/0/1

interface

Syntax
interface interface-type interface-number
View
System view
Default level
2: System level
Parameters
interface-type interface-number: Specifies an interface type and number.
Description
Use interface to enter interface view.
Examples
# Enter Ethernet 1/0/1 interface view (assuming that the interface is an Ethernet interface).
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
the group-member interface-type interface-start-number
20
to interface-type