Field
Link aggregation supported
Link aggregation enabled
Aggregation port ID
Maximum frame size
Location format
Location information
PoE PSE power source
PoE PD power source
Port PSE Priority
Port PD Priority
Port available power value
TLV type
TLV information
Description
Indicates whether link aggregation is supported on the port that
connects the LLDP neighboring device to the local device.
Indicates whether link aggregation is enabled on the port that
connects the LLDP neighboring device to the local device.
Aggregation group ID, which is 0 when link aggregation is disabled.
Maximum frame size of the port that connects the LLDP
neighboring device to the local device.
Location information format of the neighboring device which is a
communication terminal with the MED device type being Class III,
for example, an IP phone:
•
Invalid—The format of the location information is invalid.
•
Coordinate-based LCI—The location information is
coordinate-based.
•
Civic Address LCI—Typical address information.
•
ECS ELIN—Telephone for urgencies.
Location information of the neighboring device which is a
communication terminal with the MED device type being Class III,
for example, an IP phone.
PSE power source type of an LLDP neighboring device which is a
PSE device:
•
Unknown—Unknown power supply
•
Primary—Primary power supply
•
Backup—Backup power supply
PD power source type of an LLDP neighboring device which is a
PD device:
•
Unknown—Unknown power supply
•
PSE—PSE power supply
•
Local—Local power supply
•
PSE and local—PSE and local power supplies
PoE power supply priority of PSE ports:
•
Unknown.
•
Critical.
•
High.
•
Low.
PoE power receiving priority of PD ports:
•
Unknown.
•
Critical.
•
High.
•
Low.
Available PoE power on PSE ports, or power needed on PD ports,
in watts.
This field appears only when the device receives unknown basic
TLVs.
Unknown basic TLV type.
This field appears only when the device receives unknown basic
TLVs.
Information contained in the unknown basic TLV type.
196