Display Mvrp Statistics - HP 3100 v2 Series Command Reference Manual

Field
Reg-state

display mvrp statistics

Syntax
display mvrp statistics [ interface interface-list ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-list: Specifies an Ethernet interface list in the form of interface-list =
{ interface-type interface-number1 [ to interface-type interface-number2 ] }&<1-10>, where
interface-type interface-number specifies an interface by its type and number and &<1-10> indicates
that you can specify up to 10 interfaces or interface ranges. If this option is not specified, this
command displays MVRP statistics of all MVRP-enabled trunk ports.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mvrp statistics to display MVRP statistics.
Examples
# Display MVRP statistics of all MVRP-enabled ports.
<Sysname> display mvrp statistics
----[Ethernet1/0/1]----
Failed Registrations
Last PDU Origin
Frames Received
New Event Received
JoinIn Event Received
In Event Received
JoinMt Event Received
Mt Event Received
Leave Event Received
LeaveAll Event Received
Description
Registration state of the attribute declared by remote participants on the local
participant. The state can be IN, LV, or MT:
•
IN—Registered.
•
LV—Previously registered, but now being timed out.
•
MT—Not registered.
: 1
: 000f-e200-0010
: 201
: 0
: 1167
: 0
: 22387
: 31
: 210
: 63
216