HP 3100 v2 Series Command Reference Manual page 192

View
QinQ view
Default level
2: System level
Parameters
vlan-list: Specifies a list of VLANs in the format of vlan-list = { vlan-id [ to vlan-id ] }&<1-10>, where
vlan-id represents the VLAN ID ranging from 1 to 4094 and &<1-10> indicates that you can specify
up to 10 vlan-id [ to vlan-id ] parameters.
all: Specifies all VLAN IDs.
Description
Use raw-vlan-id inbound to tag frames from the specified VLANs with the SVLAN.
Use undo raw-vlan-id inbound to remove the configuration.
By default, Ethernet ports do not tag VLAN frames with outer VLAN tags.
You can configure this command in the same view multiple times. A new configuration does not
overwrite the previous ones and the configured values are automatically arranged in an ascending
order.
An inner VLAN tag corresponds to only one outer VLAN tag. To change an outer VLAN tag, delete
the old outer VLAN tagging policy and configure a new outer VLAN tag.
Related commands: qinq vid.
Examples
# Configure Ethernet 1/0/1 to tag frames from VLAN 3, VLAN 5, and VLANs 20 through 100 with
SVLAN 100.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] qinq vid 100
[Sysname-Ethernet1/0/1-vid-100] raw-vlan-id inbound 3 5 20 to 100
185