HP 3100 v2 Series Command Reference Manual page 206

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display lldp status to display LLDP status information.
If no port is specified, this command displays the global LLDP status and the LLDP status
information for all ports.
Examples
# Display the global LLDP status and the LLDP status information of all ports.
<Sysname> display lldp status
Global status of LLDP: Enable
The current number of LLDP neighbors: 0
The current number of CDP neighbors: 0
LLDP neighbor information last changed time: 0 days,0 hours,0 minutes,0 seconds
Transmit interval
Hold multiplier
Reinit delay
Transmit delay
Trap interval
Fast start times
Port 1 [Ethernet1/0/1]:
Port status of LLDP
Admin status
Trap flag
Polling interval
Number of neighbors
Number of MED neighbors
Number of CDP neighbors
Number of sent optional TLV
Number of received unknown TLV : 0
Table 46 Command output
Field
Global status of LLDP
LLDP neighbor information last
changed time
Transmit interval
Hold multiplier
Reinit delay
Transmit delay
Trap interval
Fast start times
Port 1
Port status of LLDP
: 30s
: 4
: 2s
: 2s
: 5s
: 3
: Enable
: Tx_Rx
: No
: 0s
: 0
: 0
: 0
: 23
Description
Indicates whether LLDP is globally enabled.
Time when the neighbor information was last updated.
LLDP frame transmission interval.
TTL multiplier.
LLDP reinitialization delay.
LLDP transmission delay.
Trap transmission interval.
Number of LLDP frames sent each time fast LLDP frame transmission
is triggered.
LLDP status of port 1.
Indicates whether or not LLDP is enabled on the port.
199