HP 3100 v2 Series Command Reference Manual page 222

|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mvrp state to display the MVRP state of an interface in a VLAN.
Examples
# Display the MVRP state of port Ethernet 1/0/1 in VLAN 2.
<Sysname> display mvrp state interface ethernet 1/0/1 vlan 2
MVRP state of VLAN 2 on port Eth1/0/1
Port
----------- ------ ----------- -----------
Eth1/0/1
Table 49 Command output
Field
MVRP state of VLAN 2
on port Eth1/0/1
App-state
VLAN App-state
2 VP
Description
MVRP state of Ethernet 1/0/1 in VLAN 2.
Declaration state, which indicates the state of the attribute that the local
participant declares to the remote participant. The state can be VO, VP, VN, AN,
AA, QA, LA, AO, QO, AP, QP, or LO. Each state consists of two letters.
The first letter indicates the state:
•
V—Very anxious, which means that the local participant has not declared
the attribute or has not received any Join message containing the attribute.
•
A—Anxious, which means that the local participant has declared the
attribute once or has received one Join message containing the attribute.
•
Q—Quiet, which means that the local participant has declared the attribute
two times, the local participant has declared the attribute once and has
received one Join message containing the attribute, or the local participant
has received two Join messages containing the attribute.
•
L—Leaving, which means that the local participant is deregistering the
attribute.
The second letter indicates the membership state:
•
A—Active member, which means that the local participant is declaring the
attribute, has sent at least one Join message containing the attribute, and
may receive Join messages.
•
P—Passive member, which means that the local participant is declaring the
attribute, has received Join messages containing the attribute, but has not
sent Join messages containing the attribute.
•
O—Observer, which means that the local participant is not declaring the
attribute but is monitoring the attribute.
•
N—New, which means that the local participant is declaring the attribute, is
receiving the Join message containing the attribute, but is not sending Join
messages for the attribute.
For example, VP indicates "Very anxious, Passive member".
Reg-state
IN
215