HP 3100 v2 Series Command Reference Manual page 146

reserved: Displays information about the reserved VLANs. Protocol modules determine which
VLANs are reserved VLANs according to function implementation, and reserved VLANs serve
protocol modules. You cannot configure reserved VLANs.
static: Displays the number of static VLANs and the ID for each static VLAN. The static VLANs are
manually created.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display vlan to display VLAN information.
Related commands: vlan.
Examples
# Display VLAN 2 information.
<Sysname> display vlan 2
VLAN ID: 2
VLAN Type: static
Route interface: not configured
Description: VLAN 0002
Name: VLAN 0002
Tagged Ports: none
Untagged Ports:
Ethernet1/0/1
# Display VLAN 3 information.
<Sysname> display vlan 3
VLAN ID: 3
VLAN Type: static
Route Interface: configured
IPv4 address: 1.1.1.1
IPv4 subnet mask: 255.255.255.0
IPv6 global unicast address(es):
2001::1, subnet is 2001::/64 [TENTATIVE]
Description: VLAN 0003
Name: VLAN 0003
Tagged Ports: none
Untagged Ports: none
Table 32 Command output
Field
VLAN Type
Route interface
Description
Ethernet1/0/2 Ethernet1/0/3
Description
VLAN type, static or dynamic.
Indicates whether the VLAN interface is configured or not.
Description of the VLAN.
139