HP 3100 v2 Series Command Reference Manual page 197

Media policy L2 priority : 0
Media policy Dscp
PoE PD power source
Port PD Priority
Port available power value: 12.9(w)
Table 43 Command output
Field
Global LLDP local-information
Chassis ID
System capabilities supported
System capabilities enabled
Device class
MED inventory information of
master board
HardwareRev
FirmwareRev
SoftwareRev
SerialNum
Manufacturer name
Model name
LLDP local-information of port 1
Port ID subtype
Port ID
Management address interface
type
Management address interface
ID
Management address OID
Port and protocol VLAN
ID(PPVID)
Port and protocol VLAN
supported
: 0
: PSE
: Low
Description
Global LLDP information to be sent.
Bridge MAC address of the device.
Supported capabilities:
•
Bridge—Switching is supported.
•
Router—Routing is supported.
Enabled capabilities:
•
Bridge—Switching is enabled.
•
Router—Routing is enabled.
MED device class:
•
Connectivity device—Network device.
•
Class I—Normal terminal device. It requires the basic LLDP
discovery services.
•
Class II—Media terminal device. It supports media streams, and
can also function as a normal terminal device.
•
Class III—Communication terminal device. It supports the IP
communication systems of end users, and can also function as a
normal terminal device or media terminal device.
MED inventory information of the device.
Hardware version.
Firmware version.
Software version.
Serial number.
Device manufacturer.
Device model.
LLDP information to be sent out of port 1.
Port ID type, which can be MAC address or interface name.
Port ID, the value of which depends on the port ID subtype.
Numbering type of the interface identified by the management address.
Index of the interface identified by the management address.
Management address object ID.
Port protocol VLAN ID.
Indicates whether or not protocol VLAN is supported on the port.
190