Garp Timer Leave - HP 3100 v2 Series Command Reference Manual

View
Ethernet interface view, Layer-2 aggregate interface view, port group view
Default level
2: System level
Parameters
timer-value: Join timer (in centiseconds), which must be a multiple of 5 and range from twice the Hold
timer (inclusive) and half the Leave timer (inclusive).
Description
Use garp timer join to set the GARP Join timer for an Ethernet port, Layer-2 aggregate interface, or
all ports in a port group.
Use undo garp timer join to restore the default of the GARP Join timer. This may fail if the default is
beyond the valid value range for the Join timer.
By default, the Join timer is set to 20 centiseconds.
Related commands: display garp timer, garp timer hold, and garp timer leave.
Examples
# Set the GARP Join timer to 25 centiseconds, assuming that both the Hold timer and the Leave
timer are using the default.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] garp timer join 25

garp timer leave

Syntax
garp timer leave timer-value
undo garp timer leave
View
Ethernet interface view, Layer-2 aggregate interface view, port group view
Default level
2: System level
Parameters
timer-value: Leave timer (in centiseconds), which must be a multiple of 5 and range from twice the
Join timer (exclusive) to the LeaveAll timer (exclusive).
Description
Use garp timer leave to set the GARP Leave timer for an Ethernet port, Layer-2 aggregate interface,
or all ports in a port group.
Use undo garp timer leave to restore the default of the GARP Leave timer. This may fail if the
default is beyond the valid value range for the Leave timer.
By default, the Leave timer is set to 60 centiseconds.
Related commands: display garp timer, garp timer join, and garp timer leaveall.
Examples
# Set the GARP Leave timer to 100 centiseconds, assuming that both the Join timer and the
LeaveAll timer are using the default.
177