Display An Acl Summary - HP ProCurve 2910al Access Security Manual

IPv4 Access Control Lists (ACLs)
Displaying ACL Configuration Data
9-86

Display an ACL Summary

This command lists the configured IPv4 ACLs.
Syntax: show access-list
List a summary table of the name, type, and application status
of IPv4 ACLs configured on the switch.
For example:
ProCurve(config)# show access-list
Access Control Lists
Type Appl Name
---- ---- ------------------------------------------
std yes List-01-v4 IN
ext no List-02-v4 OUT
std yes 55
Figure 9-26. Example of show access-list Command
Figure 9-27. Example of a Summary Table of Access lists
Term Meaning
Type Shows whether the listed ACL is an IPv4
Appl Shows whether the listed ACL has been applied to an interface (
Name Shows the identifier (name or number) assigned to each ACL configured in the switch.
In this switch, the ACL named "List-02-v4-
OUT" exists in the configuration.
std ext
AC or an IPv4 ACL.
yes/no
).