Vtep Group Member Remote; Vxlan - HP 6127XLG Series Command Reference Manual

[Sysname] vsi vxlan10
[Sysname-vsi-vxlan10]
Related commands
display l2vpn vsi

vtep group member remote

Use vtep group member remote to specify a VXLAN VTEP group and its member VTEPs.
Use undo vtep group member remote to restore the default.
Syntax
vtep group group-ip member remote member-ip&<1-8>
undo vtep group group-ip member remote
Default
No VXLAN VTEP group is specified on the device.
Views
System view
Predefined user roles
network-admin
Parameters
group-ip: Specifies a VXLAN VTEP group by its group IP address.
member-ip&<1-8>: Specifies a space-separated list of up to eight member VTEP IP addresses.
Examples
# Specify the VXLAN VTEP group 1.1.1.1 and its member VTEPs at 2.2.2.2, 3.3.3.3, and 4.4.4.4.
<Sysname> system-view
[Sysname] vtep group 1.1.1.1 member remote 2.2.2.2 3.3.3.3 4.4.4.4

vxlan

Use vxlan to create a VXLAN and enter VXLAN view.
Use undo vxlan to delete a VXLAN.
Syntax
vxlan vxlan-id
undo vxlan
Default
No VXLANs are created on the device.
Views
VSI view
Predefined user roles
network-admin
24