List Of Faults And Alarms - Siemens SINAMICS V90 Operating Instructions Manual

Status indicator
COM
Green
11.2

List of faults and alarms

This section lists only common faults and alarms. To view the detailed information of all
faults and alarms, call the online help for an active fault/alarm in the SINAMICS V-
ASSISTANT engineering tool.
Fault list
Fault
F1000: Internal software error
Reaction: OFF2
Acknowledgement: POWER
ON
F1001: FloatingPoint excep-
tion
Reaction: OFF2
Acknowledgement: POWER
ON
F1002: Internal software error
Reaction: OFF2
Acknowledgement:
IMMEDIATELY
F1003: Acknowledgement
delay when accessing the
memory
Reaction: OFF2
Acknowledgement:
IMMEDIATELY
F1015: Internal software error
Reaction: OFF2
Acknowledgement: POWER
ON
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 09/2016, A5E36037884-002
Color Status
- Off
Flash at 0.5 Hz
Flash at 2 Hz
Red Continuously lit
Cause
An internal software error has occurred.
An exception occurred during an operation
with the FloatingPoint data type.
An internal software error has occurred.
A memory area was accessed that does
not return a "READY".
An internal software error has occurred.
Communication with PC is not active
Communication with PC is active
Micro SD card/SD card operating (read or write)
Communication with PC is in error
Remedy
Evaluate fault buffer.
•
Carry out a POWER ON (power off/on) for
•
all components.
Upgrade firmware to later version.
•
Contact the Hotline.
•
Replace the Control Unit.
•
Carry out a POWER ON (power off/on) for
•
all components.
Upgrade firmware to the latest version.
•
Contact the Hotline.
•
Carry out a POWER ON (power off/on) for
•
all components.
Upgrade firmware to the latest version.
•
Contact the Hotline.
•
Carry out a POWER ON (power off/on).
•
Contact the Hotline.
•
Carry out a POWER ON (power off/on) for
•
all components.
Upgrade firmware to the latest version.
•
Contact the Hotline.
•
Diagnostics
11.2 List of faults and alarms
Description
329