Siemens SINAMICS V90 Operating Instructions Manual page 287

Par. No. Name
p0795 Digital inputs simulation
mode
Description: Sets the simulation mode for digital inputs.
Bit 0 to bit 9: set the simulation mode for DI 1 to DI 10
•
– Bit = 0: terminal eval
– Bit = 1: simulation
Note: If a digital input is used as signal source for the function "STO" then it is not permissible to select the
simulation mode and this is rejected.
This parameter is not saved when data is backed up.
p0796 Digital inputs simulation
mode setpoint
Description: Sets the setpoint for the input signals in the digital input simulation mode.
Bit 0 to bit 9: set the setpoint for DI 1 to DI 10
•
– Bit = 0: low
– Bit = 1: high
Note: This parameter is not saved when data is backed up.
p1001 Fixed speed setpoint 1
Description: Sets a value for the fixed speed / velocity setpoint 1.
p1002 Fixed speed setpoint 2
Description: Sets a value for the fixed speed / velocity setpoint 2.
p1003 Fixed speed setpoint 3
Description: Sets a value for the fixed speed / velocity setpoint 3.
p1004 Fixed speed setpoint 4
Description: Sets a value for the fixed speed / velocity setpoint 4.
p1005 Fixed speed setpoint 5
Description: Sets a value for the fixed speed / velocity setpoint 5.
p1006 Fixed speed setpoint 6
Description: Sets a value for the fixed speed / velocity setpoint 6.
p1007 Fixed speed setpoint 7
Description: Sets a value for the fixed speed / velocity setpoint 7.
p1058 Jog 1 speed setpoint
Description: Sets the speed/velocity for jog 1. Jogging is level-triggered and allows the motor to be incremen-
tally moved.
Note: The parameter values displayed on the BOP are integers.
p1082 * Maximum speed
Description: Sets the highest possible speed.
Notice: After the value has been modified, no further parameter modifications can be made.
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 09/2016, A5E36037884-002
Min Max
1 429496729
5
1 429496729
5
-210000.000 210000.000 0.000
-210000.000 210000.000 0.000
-210000.000 210000.000 00.000
-210000.000 210000.000 0.000
-210000.000 210000.000 0.000
-210000.000 210000.000 0.000
-210000.000 210000.000 0.000
0.00 210000.000 100.00
0.000 210000.000 1500.00
Factory Unit Data
Setting type
0 - U32
0 - U32
rpm Float
rpm Float
rpm Float
rpm Float
rpm Float
rpm Float
rpm Float
rpm Float
rpm Float
0
Parameters
10.2 Parameter list
Effective Can be
changed
IM T, U
IM T, U
IM T, U
IM T, U
IM T, U
IM T, U
IM T, U
IM T, U
IM T, U
IM T
IM T
287