Control Buttons - Siemens SINAMICS V90 Operating Instructions Manual

Basic operator panel (BOP)
6.1 BOP overview
6.1.2

Control buttons

Button
144
Description
M button
OK button
UP button
DOWN button
SHIFT button
Press the key combination for four seconds to restart the drive
Moves current display to the left page when
example .
Moves current display to the right page when
example .
Functions
Exits from the current menu
•
Switches between operating modes in the top level
•
menu
Short-pressing:
Confirms selection or input
•
Enters sub menu
•
Acknowledges faults
•
Long-pressing:
Activates auxiliary functions
Sets Drive Bus address
•
Jog
•
Saves parameter set in drive (RAM to ROM)
•
Sets parameter set to default
•
Transfers data (drive to micro SD card/SD card)
•
Transfers data (micro SD card/SD card to drive)
•
Updates firmware
•
Navigates to the next item
•
Increases a value
•
JOG in CW (clockwise)
•
Navigates to the previous item
•
Decreases a value
•
JOG in CCW (counter-clockwise)
•
Moves the cursor from digit to digit for single digit editing,
including the digit of positive/negative sign
Note:
When the sign is edited, "_" indicates positive and "-" indi-
cates negative.
is displayed at the upper right corner, for
is displayed at the lower right corner, for
Operating Instructions, 09/2016, A5E36037884-002
SINAMICS V90, SIMOTICS S-1FL6