Table of Contents
Advertisement
®
xStack
Parameter
IPv4 Address
IPv6 Address
MAC Address
Ports
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the existing entries.
Click the Delete All button to remove all the entries listed.
Click the Edit button to re-configure the specified entry.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
MAC Block List
This table is used to view unauthorized devices that have been blocked by IP-MAC binding restrictions.
To view the following window, click Security > IP-MAC-Port Binding (IMPB) > MAC Block List, as shown below:
The fields that can be configured are described below:
Parameter
VLAN Name
MAC Address
Click the Find button to find an unauthorized device that has been blocked by the IP-MAC binding restrictions
Click the View All button to display all the existing entries.
Click the Delete All button to remove all the entries listed.
DHCP Snooping
DHCP Snooping Maximum Entry Settings
Users can configure the maximum DHCP snooping entry for ports on this page.
To view the following window, click Security > IP-MAC-Port Binding (IMPB) > DHCP Snooping > DHCP Snooping
Maximum Entry Settings, as shown below:
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Description
Enter the IPv4 address to bind to the MAC address set below.
Enter the IPv6 address to bind to the MAC address set below.
Enter the MAC address to bind to the IP Address set above.
Specify the switch ports for which to configure this IP-MAC binding entry (IP Address +
MAC Address). Click the All Ports check box to configure this entry for all ports on the
Switch.
Figure 9-32 MAC Block List window
Description
Enter a VLAN Name.
Enter a MAC address.
308
Advertisement
Table of Contents
