Table of Contents
Advertisement
®
xStack
Chapter 8
ACL Configuration Wizard
Access Profile List
CPU Access Profile List
ACL Finder
ACL Flow Meter
Egress Access Profile List
Egress ACL Flow Meter
ACL Configuration Wizard
The ACL Configuration Wizard will aid the user in the creation of access profiles and ACL Rules automatically by
simply inputting the address or service type and the action needed. It saves administrators a lot of time.
To view the following window, click ACL > ACL Configuration Wizard, as shown below:
The fields that can be configured are described below:
Parameter
Type
Profile Name
Profile ID (1-1024)
Access ID (1-1024)
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
ACL
Figure 8-1 ACL Configuration Wizard window
Description
Here the user can select one of three general ACL Rule types:
Normal – Selecting this option will create a Normal ACL Rule.
CPU – Selecting this option will create a CPU ACL Rule.
Egress - Selecting this option will create an Egress ACL Rule.
After selecting to configure a Normal or Egress type rule, the user can enter the Profile
Name for the new rule here.
Here the user can enter the Profile ID for the new rule.
Here the user can enter the Access ID for the new rule. Selecting the Auto Assign option
will allow the switch to automatically assign an unused access ID to this rule.
237
Advertisement
Table of Contents
