Table of Contents
Advertisement
®
xStack
Dynamic Router Port
Ports
Click the Select All button to select all the ports for configuration.
Click the Clear All button to unselect all the ports for configuration.
Click the <<Back button to discard the changes made and return to the previous page.
Click the Apply button to accept the changes made.
IGMP Snooping Rate Limit Settings
On this page the user can configure the IGMP snooping rate limit parameters.
To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Rate
Limit Settings, as shown below:
The fields that can be configured are described below:
Parameter
Port List
VID List
Rate Limit (1-1000)
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Edit button to re-configure the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
IGMP Snooping Static Group Settings
Users can view the Switch's IGMP Snooping Group Table. IGMP Snooping allows the Switch to read the Multicast
Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch.
To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping Static
Group Settings, as shown below:
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Displays router ports that have been dynamically configured.
Select the appropriate ports individually to include them in the Router Port configuration.
Figure 5-54 IGMP Snooping Rate Limit Settings window
Description
Here the user can enter the port list used for this configuration.
Here the user can enter the VID list used for this configuration.
Here the user can enter the IGMP snooping rate limit used. By selecting the No Limit
option, the rate limit for the entered port(s) will be ignored.
116
Advertisement
Table of Contents
