Table of Contents
Advertisement
®
xStack
To view this window, click Security > 802.1X > Initialize Port(s) as shown below:
The fields that can be configured are described below:
Parameter
From Port / To Port
MAC Address
Click the Apply button to accept the changes made.
NOTE: The user must first globally enable Authentication Mode in the Error! Reference source not found.
window before initializing ports. Information in this window cannot be viewed before enabling the
authentication mode for either Port-based or MAC-based.
Reauthenticate Port(s)
This window is used to re-authenticate the device connected with the ports and display the current status of the re-
authenticated port-based port(s).
This window appears when the Authentication State is enabled in 802.1X Global Settings window.
To view this window, click Security > 802.1X > Reauthenticate Port(s) as shown below:
The fields that can be configured are described below:
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 9-21 Initialize Port(s) - Port-based window
Figure 9-22 Initialize Port(s) - MAC-based window
Description
Use the drop-down menus to select a range of ports to initialize.
Select and enter the appropriate MAC address used here. This option is only available
when the Authentication Mode has been set to MAC-based in the 802.1X Global
Settings window.
Figure 9-23 Reauthenticate Port(s) - Port-based window
Figure 9-24 Reauthenticate Port(s) - MAC-based window
300
Advertisement
Table of Contents
