Time Settings; User Account Settings - D-Link xstack DES-3810 series Reference Manual

®
xStack DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Hours (HH MM SS)
Weekdays
Click the Apply button to accept the changes made. Current configured entries will be displayed in the table at
the bottom half of the window.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

Time Settings

Users can configure the time settings for the Switch.
To view the following window, click System Configuration > Time Settings, as shown below:
The fields that can be configured are described below:
Parameter
Date (DD/MM/YYYY)
Time (HH:MM:SS)
Click the Apply button to accept the changes made.

User Account Settings

The Switch allows the control of user privileges.
To view the following window, click System Configuration > User Account Settings, as shown below:
To add a new user, type in a User Name and New Password and retype the same password in the Confirm New
Password field. Choose the level of privilege (Admin, Operator or User) from the Access Right drop-down menu.
This parameter is used to set the time in the day that this time range is to be enabled
using the following parameters:
Start Time - Use this parameter to identify the starting time of the time range, in
hours, minutes and seconds, based on the 24-hour time system.
End Time - Use this parameter to identify the ending time of the time range, in
hours, minutes and seconds, based on the 24-hour time system.
Use the check boxes to select the corresponding days of the week that this time range
is to be enabled. Tick the Select All Days check box to configure this time range for
every day of the week.
Figure 2-23 Time Settings window
Description
Enter the current day, month, and year to update the system clock.
Enter the current time in hours, minutes, and seconds.
Figure 2-24 User Account Settings window
21