Table of Contents
Advertisement
®
xStack
Ethernet Type (0-FFFF)
Time Range Name
Ports
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
After clicking the Show Details button in the CPU Access Rule List, the following page will appear:
Click the Show All Rules button to navigate back to the CPU Access Rule List.
Adding a CPU IPv4 ACL Profile
The window shown below is the Add CPU ACL Profile window for IP (IPv4). To use specific filtering masks in this
ACL profile, click on the packet filtering mask field to highlight it red. This will add more filed to the mask.
After clicking the Add CPU ACL Profile button, the following page will appear:
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Select Deny to specify that the packets that match the access profile are not forwarded by
the Switch and will be filtered.
Enter the appropriate Ethernet Type information.
Tick the check box and enter the name of the Time Range settings that has been
previously configured in the Time Range Settings window. This will set specific times
when this access rule will be implemented on the Switch.
Enter the list of ports, used for this configuration, here.
Figure 8-28 CPU Access Rule Detail Information window (Ethernet ACL)
260
Advertisement
Table of Contents
