D-Link DES-3528 Series Hardware Installation Manual
Xstack
Hide thumbs
Also See for DES-3528 Series:
- Cli reference manual (605 pages) ,
- Reference manual (378 pages) ,
- User manual (322 pages)
Related Manuals for D-Link DES-3528 Series
Summary of Contents for D-Link DES-3528 Series
-
Page 1: Hardware Installation Guide
® Hardware Installation Guide ® DES-3528/DES-3552 Series Product Model: xStack Layer 2 Managed Stackable Fast Ethernet Switch Release 2.6... - Page 2 © 2010 D-Link Corporation. All rights reserved. Reproduction in any manner whatsoever without the written permission of D-Link Corporation is strictly forbidden. Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation.
- Page 3 ® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
-
Page 4: Table Of Contents
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Table of Contents Intended Readers .................................... v Typographical Conventions .................................... v Notes, Notices, and Cautions ................................. v Safety Instructions ..................................vi Safety Cautions ...................................... - Page 5 ® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Introduction ....................................23 Login to Web Manager ....................................23 Web-based User Interface ..................................... 24 Web Pages ........................................25 Technical Specifications ..........................27 ...
-
Page 6: Intended Readers
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Intended Readers The DES-3528/DES-3552 Switch Series Hardware Installation Guide contains information for setup and management of the Switch. This manual is intended for network managers familiar with network management concepts and terminology. -
Page 7: Safety Instructions
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Safety Instructions Use the following safety guidelines to ensure your own personal safety and to help protect your system from potential damage. Throughout this document, the caution icon ( ) is used to indicate cautions and precautions that you need to review and follow. -
Page 8: General Precautions For Rack-Mountable Products
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide • To help prevent electric shock, plug the system and peripheral power cables into properly grounded electrical outlets. These cables are equipped with three-prong plugs to help ensure proper grounding. Do not use adapter plugs or remove the grounding prong from a cable. -
Page 9: Protecting Against Electrostatic Discharge
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide NOTE: A qualified electrician must perform all connections to DC power and to safety grounds. All electrical wiring must comply with applicable local, regional or national codes and practices. CAUTION: Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. -
Page 10: Introduction
Rear Panel Description Side Panel Description Gigabit Combo Ports ® The DES-3528/DES-3552 Series are layer 2 Fast Ethernet switches and members of the D-Link xStack family. ® Ranging from 10/100Mbps edge switches to core gigabit switches, the xStack switch family has been future-proof designed to provide a stacking architecture with fault tolerance, flexibility, port density, robust security and maximum throughput with a user-friendly management interface for the networking professional. -
Page 11: Features
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide routers, switches and other networking devices. The dual speed ports use standard twisted-pair cabling and are ideal for segmenting networks into small, connected sub networks for superior performance. Each 10/100 port can support up to 200 Mbps of throughput in full-duplex mode. -
Page 12: Ports
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Ports The following table lists the relative ports that are present within each switch: Device Features DES-3528 DES-3528DC DES-3528P DES-3552 DES-3552P 10/100BASE-T Ports 24 Ports 24 Ports 24 Ports 48 Ports 48 Ports... -
Page 13: Front-Panel Components
DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide NOTE: For customers interested in D-View, D-Link Corporation's proprietary SNMP management software, go to the D-Link Website (www.dlink.com) and download the software and manual. Front-Panel Components DES-3528 •... -
Page 14: Led Indicators
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide • Two 1000BASE-T ports located to the rear • One female DCE RS -232 DB-9 console port • LEDs for Power, Console, RPS, Master, Link/Act/Speed for each port Figure 1- 4. - Page 15 ® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Figure 1- 9. LED Indicators on DES-3528P switch Figure 1- 10. LED Indicators on DES-3552P switch LED indicators for DES-3528/DES-3528DC/DES-3552/DES-3528P/DES-3552P Location LED Indicative Color Status Description Solid Light Power On Power...
- Page 16 ® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide When there is a secure 10Mbps Solid Amber Ethernet connection (or link) at any of the ports. When there is reception or transmission Blinking Amber (i.e. Activity—Act) of data occurring at an Ethernet connected port.
-
Page 17: Rear Panel Description
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Rear Panel Description The DES-3528 rear panel contains ports 27 and 28, (1000BASE-T), an AC power connector, and an outlet for an optional external RPS. Figure 1- 11. Rear panel view of the DES-3528 The DES-3528P rear panel contains ports 27 and 28, (1000BASE-T), an AC power connector, and an outlet for an optional external RPS. -
Page 18: Side Panel Description
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Side Panel Description The left and right-hand panel of the DES-3528 and DES-3528DC Switches contain a heat vent. The heat vents are used to dissipate heat. Do not block these openings, and leave at least 6 inches of space at the rear and sides of the Switch for proper ventilation. -
Page 19: Gigabit Combo Ports
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Gigabit Combo Ports In addition to the 24/48 10/100 Mbps ports, the Switch features two Gigabit Ethernet Combo ports. These two ports are 1000BASE-T copper ports (provided) and SFP ports (optional). See the diagram below to view the two SFP port modules being plugged into the Switch. -
Page 20: Installation
• RS-232 console cable If any item is found missing or damaged, please contact your local D-Link Reseller for replacement. Please Note the DES-3528DC Switch does not require an AC power cord therefore none is provided. Before You Connect to the Network The site where you install the Switch may greatly affect its performance. -
Page 21: Installing The Switch Without The Rack
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Installing the Switch without the Rack When installing the Switch on a desktop or shelf, the rubber feet included with the Switch should first be attached. Attach these cushioning feet on the bottom at each corner of the device. -
Page 22: Mounting The Switch In A Standard 19" Rack
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Mounting the Switch in a Standard 19" Rack CAUTION: Installing systems in a rack without the front and side stabilizers installed could cause the rack to tip over, potentially resulting in bodily injury under certain circumstances. Therefore, always install the stabilizers before installing components in the rack. -
Page 23: Connecting Dc Power To The Des-3528Dc
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Connecting DC Power to the DES-3528DC Follow the instructions below to connect the DC power supply of the DES-3528DC to the DC power source. Figure 2- 4. Power connections attached to contacts after assembly 1. -
Page 24: Connecting The Switch
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Section 3 Connecting the Switch Switch to End Node Switch to Hub or Switch Connecting To Network Backbone or Server NOTE: All 24/48 high-performance NWay Ethernet ports can support both MDI-II and MDI-X connections. -
Page 25: Connecting To Network Backbone Or Server
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Figure 3- 2. The Switch connected to a normal (non-Uplink) port on a hub or switch using a straight or crossover cable Connecting To Network Backbone or Server The two SFP combo ports are ideal for linking to a network backbone or server. -
Page 26: Introduction To Switch Management
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Section 4 Introduction to Switch Management Management Options Web-based Management Interface SNMP-Based Management Connecting the Console Port (RS-232 DCE) First Time Connecting to the Switch Password Protection SNMP Settings IP Address Assignment Management Options... - Page 27 Upon the initial connection, there is no user name or password and therefore just press “enter” twice to access the command line interface. DES-3528 Fast Ethernet Switch Command Line Interface Firmware: Build 2.60.017 Copyright(C) 2010 D-Link Corporation. All rights reserved. Username: Figure 4- 1. Initial screen after first connection...
-
Page 28: First Time Connecting To The Switch
DES-3528:admin# shown below: There is no initial username or password. Leave the Username and Password fields blank. DES-3528 Fast Ethernet Switch Command Line Interface Firmware: Build 2.60.017 Copyright(C) 2010 D-Link Corporation. All rights reserved. Username: PassWord: DES-3528:admin# Figure 4- 2. Command Prompt NOTE: The first user automatically gets Administrator level privileges. -
Page 29: Snmp Settings
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide NOTE: Passwords are case sensitive. User names and passwords can be up to 15 characters in length. The sample below illustrates a successful creation of a new administrator-level account with the user name "newmanager". -
Page 30: Ip Address Assignment
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Using SNMP v.3 individual users or groups of SNMP managers can be allowed to perform or be restricted from performing specific SNMP management functions. The functions allowed or restricted are defined using the Object Identifier (OID) associated with a specific MIB. - Page 31 ® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide The Switch's MAC address can also be found from the Web management program on the Switch Information (Basic Settings) window on the Configuration menu. The IP address for the Switch must be set before it can be managed with the Web-based manager. The Switch IP address can be automatically set using BOOTP or DHCP protocols, in which case the actual address assigned to the Switch must be known.
-
Page 32: Web-Based Switch Configuration
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Section 5 Web-based Switch Configuration Introduction Login to Web Manager Web-based User Interface Web Pages Introduction All software functions of the Switch can be managed, configured and monitored via the embedded Web-based (HTML) interface. -
Page 33: Web-Based User Interface
Area 1 Select the folder or window to be displayed. The folder icons can be opened to display the hyper- linked window buttons and subfolders contained within them. Click the D-Link logo to go to the D- Link Website. Area 2 Presents a graphical near real-time image of the front panel of the Switch. -
Page 34: Web Pages
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide NOTICE: Any changes made to the Switch configuration during the current session must be saved in the Save Changes Web menu (explained below) or use the command line interface (CLI) command save. Web Pages When you connect to the management mode of the Switch with a Web browser, a login window is displayed. - Page 35 ® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Compound Authentication Settings, Compound Authentication Guest VLAN Settings, Port Security, Port Security Settings, Port Security VLAN Settings, Port Security Entries, ARP Spoofing Prevention Settings, BPDU Attack Protection, Loopback Detection Settings, Traffic Segmentation Settings, NetBIOS Filtering Settings, DHCP Server Screening, DHCP Server Screening Port Settings, DHCP Offer Permit Entry Settings, Access Authentication Control, Enable Admin, Authentication Policy Settings, Application Authentication Settings, Authentication Server...
-
Page 36: Technical Specifications
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Appendix A Technical Specifications General IEEE 802.3 10BASE-T Ethernet Protocols IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3z Gibabit Ethernet. (SFP “Mini GBIC”) IEEE 802.1D Spanning Tree IEEE 802.1D/S/W Spanning Tree IEEE 802.1Q VLAN... - Page 37 ® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Physical and Environmental Internal Power Supply DES-3528 Input: 100~240V, AC/0.5A(Max), 50~60Hz Output: 12V, 1.2A(Max) Internal universal power supply DES-3552 Input: 100~240V, AC/0.8A(Max), 50~60Hz Output: 12V, 2.1A(Max) Internal universal power supply DES-3528P Input: 100~240V, AC/6.3A(Max), 50~60Hz...
- Page 38 ® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide A3/A4: 0˚ to 50˚ C DES-3528DC: 0˚ to 45˚ C DES-3528P: 0˚ to 50˚ C DES-3552: A1: 0˚ to 45˚ C A2/A3: 0˚ to 50˚ C DES-3552P: 0˚...
- Page 39 ® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Performance Detailed Description Feature Wire speed on all FE/GE ports Full-wire speed (full-duplex) operation on all FE/GE ports Forwarding Mode Store and Forward Switching Capacity DES-3528/DES-3528DC/DES-3528P 12.8Gbps DES-3552/DES-3552P 17.6Gbps...
- Page 40 ® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide • Support Full-Duplex operations • IEEE 802.3x Flow Control support for Full-Duplex mode, back pressure when Half-Duplex mode, and Head-of-line blocking prevention SFP Transceivers Supported: • DEM-310GT (1000BASE-LX) •...
- Page 41 Transmit+ & Power+ Positive Vport Transmit- & Power+ 8. All the PoE ports can work with all D-Link 802.3af capable devices 9. All the PoE ports can work with all non-802.3af capable D-Link AP, IP Cam and IP phone via DWL-P50...
- Page 42 ® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide FE Port Pin Assignment for Data Pairs: (MDI-X) PIN# Signal Description Receive+ Positive Receive signal Receive- Negation Receive signal Transmit+ Positive Transmit signal Transmit- Negation Transmit signal FE Port PSE Pinout Assignment for Power Pairs: (alternative A MDI-X) PIN# Signal...
-
Page 43: Cable Lengths
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Appendix B Cable Lengths Use the following table to as a guide for the maximum cable lengths. Standard Media Type Maximum Distance 1000BASE-LX, Single-mode fiber module 10km 1000BASE-SX, Multi-mode fiber module 550m... -
Page 44: Glossary
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Appendix C Glossary 1000BASE-SX: A short laser wavelength on multimode fiber optic cable for a maximum length of 2000 meters 1000BASE-LX: A long wavelength for a "long haul" fiber optic cable for a maximum length of 10 kilometers 1000BASE-T: 1000Mbps Ethernet implementation over Category 5E cable. - Page 45 ® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide half duplex: A system that allows packets to be transmitted and received, but not at the same time. Contrast with full duplex. IP address: Internet Protocol address. A unique identifier for a device attached to a network using TCP/IP. The address is written as four octets separated with full-stops (periods), and is made up of a network section, an optional subnet section and a host section.
- Page 46 ® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide UDP - User Datagram Protocol: An Internet standard protocol that allows an application program on one device to send a datagram to an application program on another device. VLAN - Virtual LAN: A group of location- and topology-independent devices that communicate as if they are on a common physical LAN.
-
Page 47: Warranties And Tech Support Information
® xStack DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch Hardware Installation Guide Warranties and Tech Support Information...