Lldp Dot1 Tlvs Settings - D-Link xstack DES-3810 series Reference Manual

®
xStack
The fields that can be configured are described below:
Parameter
From Port / To Port
Port Description
System Name
System Description
System Capabilities
Click the Apply button to accept the changes made.

LLDP Dot1 TLVs Settings

LLDP Dot1 TLVs are organizationally specific TLVs which are defined in IEEE 802.1 and used to configure an
individual port or group of ports to exclude one or more of the IEEE 802.1 organizational port VLAN ID TLV data types
from outbound LLDP advertisements.
To view the following window, click L2 Features > LLDP > LLDP > LLDP Dot1 TLVs Settings, as shown below:
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 5-111 LLDP Basic TLVs Settings window
Description
Here the user can enter the port range to use for this configuration.
Here the user can enable or disable the Port Description option.
Here the user can enable or disable the System Name option.
Here the user can enable or disable the System Description option.
Here the user can enable or disable the System Capabilities option.
155