Reauthenticate Port(S) For Port Based 802.1X - D-Link Xstack DGS-3600 Series User Manual

Reauthenticate Port(s) for Port Based 802.1X

This window allows reauthentication of a port or group of ports by using the pull-down menus From and To and clicking Apply.
The Reauthenticate Port Table displays the current status of the reauthenticated port(s) once Apply has been clicked.
Click Security > 802.1X > Reauthenticate Port(s) to open the Reauthenticate Port(s) window:
This window displays the following information:
Parameter Description
Unit Select the Switch in the switch stack to be configured.
Port The port number of the reauthenticated port.
MAC Address Displays the physical address of the Switch where the port resides.
Auth PAE State The Authenticator State will display one of the following: Initialize, Disconnected, Connecting,
Authenticating, Authenticated, Aborting, Held, ForceAuth, ForceUnauth, and N/A.
BackendState
The Backend State will display one of the following: Request, Response, Success, Fail, Timeout,
Idle, Initialize, and N/A.
PortStatus The status of the controlled port can be Authorized, Unauthorized, or N/A.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 11- 1 . Reauthenticate Port window 9
NOTE: The user must first globally enable 802.1X in the DGS-3600 Web
Management Tool window before initializing ports. Information in the
Initialize Ports Table cannot be viewed before enabling 802.1X.
262