Motor - Panasonic minas a series Operating Manual

Installation

Motor

Location
A Indoors, where the driver is not subjected to rain water and direct sun beams.
B Avoid the place where the driver is subjected to corrosive gases, flammable gases, grind-
ing liquids, oil mists, iron powders and cutting particles.
C Place in a well-ventilated, and humid- and dust-free space.
D Easy maintenance, inspections and cleaning is also important.
Environmental Conditions
Item
Ambient temperature
Ambient humidity
Storage temperature
Storage humidity
Vibration
How to Install
The motor can be installed either vertically or horizontally. Observe the following notes.
A Horizontal mounting
• Place the motor with the cable outlet facing down to prevent the entry of oil and water.
B Vertical mounting
• If the motor is coupled with a reduction gear, make sure that the oil in the reduction gear does not
enter into the motor.
Oil and Water Protections
A This motor(IP65 rating) can be used where it is subjected to water and/or oil drops, but is
not water or oilproof. Therefore, the motors should not be placed or used in such environ-
ment.
B If the motor is coupled with a reduction gear, use the motor should with oil seals to prevent
the reduction gear oil from entering into the motor.
C Don't use the motor with the cables being immersed in oil or water.
Conditions
0 to 40˚C (free from freezing)
Not greater than 90%RH (free from condensation)
-20 to 80˚C (free from condensation)
Not greater than 90%RH (free from condensation)
Not greater than 49m/s2 (5G) in operation; not greater than 24.5m/s2 (2.5G) at rest
- 16 -