Panasonic minas a series Operating Manual page 107

"Absolute" Driver
How to install the battery
1. Cut away the upper right corner of the
terminal block cover for types 1 through 3
1Remove the screw.
2Remove the cover,
and cut away its
upper right corner.
Use nippers.
3Replace the cover,
and tighten the screw.
3. Set the holder to the driver.
1Connect the cable.
Battery holder
Terminal block cover
- App. 26 -
2. Insert the battery into the holder.
+
-
Battery
DVOP2060
1Insert the battery
3Snap the upper lug into place
while pressing the
2Set the lug
into place.
Driver
+
Battery holder
-
(optional: DVOP2061)
mark.
Note:
Make sure that the cable
is not caught between
the driver and holder.