Installation - Panasonic minas a series Operating Manual

Installation

The driver and motor should be properly installed to avoid failures, mechanical damages and injuries.
Amplifier
Location
A Indoors, where the driver is not subjected to rain water and direct sun beams. Note that
the driver is not a waterproof structure.
B A void the place where the driver is subjected to corrosive gases, flammable gases,
grinding liquids, oil mists, iron powders and cutting particles.
C Place in a well-ventilated, and humid- and dust-free space.
D Place in a vibration-free space.
Environmental Conditions
Item
Ambient temperature
Ambient humidity
Storage temperature
Storage humidity
Vibration
Altitude
How to Install
A his is a rack-mount type.
Place the driver vertically. Allow enough space surrounding for ventilation.
Type 3 and smaller (up to 750W): Back panel mount type (projected, use Bracket A)
Type 4 and larger (1kW and larger): Front panel mount type (recessed, use Bracket B)
Bracket A
B If you want to change the mounting configuration, use the optional bracket (see Appendix
"Optional Parts").
C Fit to noncombustibles such as metal.
Not greater than 90%RH (free from condensation)
Not greater than 90%RH (free from condensation)
Not greater than 5.9m/s2 (0.6G) at 10 to 60 Hz
(Types 1 to 3)
MSDA 750W
and smaller
Conditions
0 to 55ÅãC (free from freezing)
-20 to 80ÅãC (free from condensation)
Not greater than 1000 m
(Types 4-2 - 4-3,Type 5)
Bracket B
MSDA 1kW
and larger
- 14 -