End Point; Servo Travel Adjustment; Limit Point Adjustment - FUTABA 14SG Instruction Manual

END POINT

The End Point function adjusts the left and right
servo throws, generates differential throws, and
will correct improper linkage settings.
The travel rate can be varied from 0% to 140%
in each direction on channels 1 to 12(FASSTest
12CH mode). Also, the limit point where servo
throw stops may be varied from 0% to 155%.
R T N
H O M E / E X I T
RETURN

Servo travel adjustment

*When the RTN button is touched for one second, the rate is
reset to the initial value.

Limit point adjustment

*When the RTN button is touched for one second, the limit
point is reset to the initial value.
(The display screen is an example. The
screen depends on the model type.)
<SensorTouch™>
<Functions of Linkage Menu> 81