Governor Mixing Function; Rpm Adjustment; Unit Display Selection - FUTABA 14SG Instruction Manual

GOVERNOR mixing
of the helicopter's rotor head. The rotor head speed
R T N
H O M E / E X I T
RETURN
Setting method
*When the function is set ON/OFF at the governor setup
screen, the governor rpm setting channel end point servo
travel and limit point are now initialized.
initialized to 100 and the limit point is initialized to 155.
servo travel is initialized to 100 and the limit point is
initialized to 135.
*When using an independent governor [ON]/[OFF] switch,
connect the AUX([ON]/[OFF]) connector of the governor to
menu of the Linkage Menu.
Note: Always set (Control) and (Trim) to [--]
for [Governor] of the Function menu of the
Linkage menu.
(Currently selected condition name)
sensitivity is reset to the initial value.)
<Functions of Model Menu (Helicopter Functions)>
<SensorTouch™>
161