Rate Adjustment - FUTABA 14SG Instruction Manual

Setting method
the RTN button to switch to the data input
touch sensor.
*The display blinks.
Touch the RTN button to activate the
When setting a switch, move the cursor to
call the selection screen. Select the switch
*For a description of the switch selection method, see the
description at the back of this manual.
and touch the RTN button to switch to the
by scrolling the touch sensor.
*When the RTN button is touched for one second, the rate is
reset to the initial value.)
and return to the cursor mode.
(Chip Aileron)
128 <Model Menu (Airplane/Glider Functions)>
FLP 3
(Brake Flap)
FLP 1
(Camber Flap)
AIL1
(Main Aileron)
AIL 3
V-TAIL
ELEVATOR
ELEVATOR 2
When setting a cut switch, move the cursor
button to access the selection screen. Select
*For a description of the switch selection method, see the
description at the back of this manual.
Move the cursor to the rate1 or rate2
item and touch the RTN button to switch
independently by scrolling the touch sensor.
*When the RTN button is touched for one second, the rate is
reset to the initial value.)
and return to the cursor mode.
FLP 4
(Brake Flap)
FLP 2
(Camber Flap)
AIL 2
(Main Aileron)
AIL 4
(Chip Aileron)
AILVATOR
ELEVATOR
ELEVATOR 2