Telemetry: Ext-Volt - FUTABA 14SG Instruction Manual

TELEMETRY : EXT-VOLT
The EXT-VOLT screen will display the data
from the EXT-battery output from the R7008SB
receiver. In order to use this function, it is necessary
to connect External voltage connector of the
R7008SB receiver to a CA-RVIN-700 (FUTM5551)
or SBS-01V to the battery you desire to measure
the voltage of.
R T N
H O M E / E X I T
RETURN
Alert set
*When the RTN button is touched for one second, the rate is
reset to the initial value.
*CA-RVIN-700 or SBS-01V must be installed in the aircraft.
You will be alerted by an alarm or vibration if
the voltage set by you is exceeded.
*It cannot be used in FASST mode and S-FHSS mode.
*Only receiver voltage and EXT voltage will be received in
the FASSTest12CH mode.
*The FASSTest14CH mode will display all telemetry data.
If the following types are selected, the transmitter will
vibrate during the warning.
TYPE 1
TYPE 2
TYPE 3
TYPE 4
<Functions of Linkage Menu>
<SensorTouch™>
"Vibes" type
93