Telemetry: Vario; Alert Set: Rise Side; Alert Set: Dive Side - FUTABA 14SG Instruction Manual

TELEMETRY : VARIO
VARIO is a screen which displays / sets up the
variometer information from an optional altitude
sensor or GPS sensor.
be known.
If it becomes higher or lower than the setting an
alarm and/or vibration will alert you.
To ensure that the pilot is aware as to the model's
R T N
H O M E / E X I T
RETURN
Alert set : Rise side
*When the RTN button is touched for one second, the rate is
reset to the initial value.
*An altitude sensor or GPS sensor must be installed in the aircraft.
status, the T14SG incorporates a different melody
for ascent and descent. Additionally, depending
upon the rate of climb or descent, the tones vary to
indicate whether or not the airplane is climbing or
descending at a rapid rate.
*It cannot be used in FASST mode and S-FHSS mode.
*Only receiver voltage and EXT voltage can be used in
FASSTest12CH mode.
*The FASSTest14CH mode can use all the telemetry functions.
Alert set : Dive side
*When the RTN button is touched for one second, the rate is
reset to the initial value.
<SensorTouch™>
"Vibes" type
If the following types are selected, the
transmitter will vibrate during the warning.
TYPE 1
TYPE 2
TYPE 3
TYPE 4
<Functions of Linkage Menu> 97