FUTABA 14SG Instruction Manual page 13

The following additional accessories are available from your dealer. Refer to a Futaba catalog
for more information:
spacer. However, charge with the charger only for LiFe.
by placing the instructor on a separate transmitter. Note that the T14SG transmitter may be
connected to another T14SG system, as well as to any other models of Futaba transmitters. The
T14SG transmitter uses one of the three cord plug types according to the transmitter connected.
(Refer to the description at the TRAINER function instructions). The part number of this cord is:
the model and the purpose of using you. If you utilize a S.BUS system, you should choose a S.BUS
servo. An analog servo cannot be used if "FASSTest12CH mode" is used.
communication system and to acquire the information from a model high up in the sky.
[ Temperature sensor : SBS-01T] [Altitude sensor : SBS-01A] [RPM sensor magnet type : SBS-
01RM][RPM sensor optical type : SBS-01RO] [GPS sensor : SBS-01G] [Voltage sensor : SBS-
01V]
a heavy-duty version with heavier wire, are available to aid in your larger model and other
installations.
head speed regardless of blade pitch, load, weather, etc.
(Receivers for FASSTest and FASST,S-FHSS types are available.)
12 <Before Use>