1. Move the cursor to the curve rate setting
the RTN button to switch to the data input
mode.
*When the RTN button is touched for one second, the rate is
reset to the initial value.)
and return to the cursor mode.
2. Repeat this procedure for each point.
1. Move the cursor to the curve point setting
button to switch to the data input mode.
sensor.
*When the RTN button is touched for one second, the curve
position is reset to the initial value.)
and return to the cursor mode.
2. Repeat this procedure for each point.
Move the cursor to the curve point setting
the RTN button for one second.
126
<Model Menu (Airplane/Glider Functions)>