Camber/Motor/Butterfly Control Setting (Glider); Trim Setting - FUTABA 14SG Instruction Manual

each condition.

Trim setting

*The trim setup screen is displayed.
Trim selection
*The setting can be changed.
Trim rate setting
(When the RTN button is touched for one second, the trim
rate is reset to the initial value.)
Trim mode selection
*[NORMAL]/[REVERSE] selection is possible in "ATL"
mode.
Throttle trim (helicopter only)
* The throttle trim in conditions other than "Normal"
condition can be inhibited.
*When "X" is displayed, THR trim is inhibited in conditions
other than normal condition.
Channel replacement
<Functions of Linkage Menu> 77