Telemetry: Battery - FUTABA 14SG Instruction Manual

TELEMETRY : BATTERY
In this screen, the battery voltage is displayed.
In order to use this function, it is necessary to
connect External voltage connector of R7008SB ⇔
SBS-01V ⇔ Battery
SBS-01V measures two batteries. The drive
battery connected to two lines is displayed on EXT-
VOLT. The battery for receivers connected to 3P
lines is displayed here.
R T N
H O M E / E X I T
RETURN
Alert set
*When the RTN button is touched for one second, the rate is
reset to the initial value.
98 <Functions of Linkage Menu>
*SBS-01V must be installed in the aircraft.
*It cannot be used in FASST mode and S-FHSS mode.
*Only receiver voltage and EXT voltage can be used in
FASSTest12CH mode.
*The FASSTest14CH mode can use all the telemetry functions.
<SensorTouch™>
"Vibes" type
If the following types are selected, the transmitter will
vibrate during the warning.
TYPE 1
TYPE 2
TYPE 3
TYPE 4