Show Ports - D-Link DGS-1210/ME Series Reference Manual

DGS-1210-28MP/ME:5# config ports 8-11 capability_advertised 10G_full
Command: config ports 8-11 capability_advertised 10G_full
Success
DGS-1210-28MP/ME:5#

show ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the description of port 13 on the Switch:
DGS-1210-28MP/ME:5# show ports 13 description
Command: show ports 13 description
Port State/
Type MDI
------- ------------- -----------------------------
1 Enabled Auto/Disabled
Desc:
DGS-1210-28MP/ME:5#
show ports
Purpose
Syntax
Description
Parameters
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To display the current configuration of a range of ports.
show ports {<portlist> | all} {[description | err_disabled]}
The show ports command displays the current configuration of
range of ports or all ports.
<portlist> − A port or range of ports whose settings are to be
displayed.
all – Specifies all ports to be displayed.
description – To display description for specified ports.
err_disabled – To display err_disabled for specified ports.
None.
Settings
Speed/Duplex/FlowCtrolSpeed/DuplexFlowCtrolLearning Downgrade
To display the current configuration of a range of ports.
show ports {<portlist> | all} [auto_negotiation | media_type |
linkup_time]
The show ports command displays the current configuration of
range of ports or all ports.
<portlist> − A port or range of ports whose settings are to be
displayed.
all – Specifies all ports to be displayed.
auto_negotiation – Specifies to display the port auto-negotiation
information.
media_type – Specifies to display the media type of the port.
linkup_time – Specifies to display the linkup time information of
Connection
-----------------------
Link Down
51
Address Auto
-------------- --------------
Enabled Disabled