Show Stp Mst_Config_Id; Create Stp Instance_Id - D-Link DGS-1210/ME Series Reference Manual

Designated Bridge
Configured Forward delay 15, Max age 20, Max hops 20
Operational Forward delay 15, Max age 20
Topology Changes Count : 0
Last Topology Change
Interface Role
------------ ------
DGS-1210-28MP/ME:5#

show stp mst_config_id

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show the MSTP configuration identification currently set on the Switch:
DGS-1210-28MP/ME:5# show stp mst_config_id
Command: show stp mst_config_id
Name
Revision
Instance
--------
0
----------------------------------------------------------------------------
DGS-1210-28MP/ME:5#

create stp instance_id

Purpose
Syntax
Description
Parameters
Restrictions
To create instance id 1:
DGS-1210-28MP/ME:5# create stp instance_id 1
Command: create stp instance_id 1
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
00:00:00:00:00:00
: 0
Sts Cost
------ ------
To display the MSTP configuration identification.
show stp mst_config_id
The show stp mst_config_id command displays the Switch's
current MSTP configuration identification.
None.
None.
[00:23:22:03:14:25]
0
Vlans mapped
----------------------------------------------------------
1-1024,1025-2048,2049-3072,3073-4094
To create instance ID on the Switch.
create stp instance_id <value 1-63>
The create stp instance_id command creates an instance ID of
STP on the Switch.
<value 1-63> - The value of the instance ID to be created.
Only administrator-level users can issue this command.
Priority 0
Prio.Nbr Type
----------- -------
179