To restore all of the Switch's parameters to their default values:
DGS-1210-28MP/ME:5# reset system
Command: reset system
Are you sure you want to proceed with the system reset?(y/n)y
% Success.
DGS-1210-28MP/ME:5# System will Reboot....
reload config config_id
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To reload all of the Switch's configuration:
DGS-1210-28MP/ME:5# reload config config_id 1
Command: reload config config_id 1
Are you sure you want to reload the config?(y/n)y
% Reload config 1 successfully.
Are you sure you want to proceed with the system reboot?(y/n)n
DGS-1210-28MP/ME:5# reload config config_id 1
Command: reload config config_id 1
Are you sure you want to reload the config?(y/n)y
% Reload config 1 successfully.
Are you sure you want to proceed with the system reboot?(y/n)y
% Please wait, the switch is rebooting...
DGS-1210-28MP/ME:5# System will Reboot....
logout
Purpose
Syntax
Description
Parameters
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To reload the configuration to the Switch.
reload config config_id <value 1-2>
The reload config config_id command reloads the configuration to
the Switch.
<value 1-2> - Specifies the configuration id.
Only administrator-level users can issue this command.
To log out a user from the Switch's console.
Logout
The logout command terminates the current user's session on the
Switch's console.
None.
25