Show Sntp; Enable Sntp - D-Link DGS-1210/ME Series Reference Manual

DGS-1210-28MP/ME:5# config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval
60
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 60
Success.
DGS-1210-28MP/ME:5#

show sntp

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNTP configuration information:
DGS-1210-28MP/ME:5# show sntp
Command: show sntp
SNTP Information
-------------------------------------------------------------------------
Current Time Source
SNTP
SNTP Primary Server
SNTP Secondary Server
SNTP Poll Interval
DGS-1210-28MP/ME:5#

enable sntp

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To display the SNTP information.
show sntp
The show sntp command displays SNTP settings information,
including the source IP address, time source and poll interval.
None.
None.
: Local
: Disabled
: 0.0.0.0
: 0.0.0.0
: 30 sec
To enable SNTP server support.
enable sntp
The enable sntp command enables SNTP server support. SNTP
service must be separately configured (see config sntp). Enabling
and configuring SNTP support override any manually configured
system time settings.
None.
Only administrator and Operator-level users can issue this
command. SNTP settings must be configured for SNTP to function
(config sntp).
387