Show Ports - D-Link DGS-3100 SERIES Cli Manual

DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
Example usage:
To configure the speed of ports 1-3 to be 10 Mbps, full duplex, learning and state enabled:

show ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the configuration of all ports on the Switch:
DGS3100# show ports
Port Port
State
----- ------------
1:1 Enabled
1:2 Enabled
1:3 Enabled
1:4 Enabled
1:5 Enabled
1:6 Enabled
1:7 Enabled
1:8 Enabled
1:9 Enabled
1:10 Enabled
1:11 Enabled
1:12 Enabled
1:13 Enabled
1:14 Enabled
1:15 Enabled
1:16 Enabled
1:17 Enabled
1:18 Enabled
1:19 Enabled
DGS3100#
25
DGS3100# config ports 1-3 speed 10_full learning enable state enable
Success.
DGS3100#
To display the current configuration of a range of ports.
show ports {<portlist>}
The show ports command displays the current configuration of a
port or range of ports.
<portlist> − A port or range of ports whose settings are to be
displayed.
None.
Settings
Speed/Duplex/FlowCtrl Speed/Duplex/FlowCtrl Learning
------------------------------
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Auto/Disabled
Connection
------------------------------
Link Down
Link Down
100M/Full/Disabled
100M/Full/Disabled
Link Down
Link Down
Link Down
Link Down
Link Down
Link Down
Link Down
Link Down
Link Down
Link Down
Link Down
Link Down
Link Down
Link Down
Link Down
Address
-----------
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled