Disable Password Encryption; Create Account - D-Link DGS-1210/ME Series Reference Manual

Success.
DGS-1210-28MP/ME:5#

disable password encryption

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable password encryption on the Switch:
DGS-1210-28MP/ME:5# disable password encryption
Command: disable password encryption
Success.
DGS-1210-28MP/ME:5#

create account

Purpose
Syntax
Description
Parameters
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
Used to disable password encryption on a user account.
disable password encryption
The user account configuration information will be stored in the
configuration file, and can be applied to the system at a time in the
future. If the password encryption is enabled, the password will be in
encrypted form. If password encryption is disabled and the user
specifies the password in encrypted form, or if the password has
been converted to encrypted form by the last enabled password
encryption command, the password will still be in encrypted form. It
can not revert back to plain text.
None.
Only Administrat level users can issue this command.
To create user accounts.
create account [admin | operator | power-user | user]
<username 15>
The create account command creates an administrator, operator,
or user account that consists of a username and an optional
password. Up to 31 accounts can be created. You can enter
username and Enter. In this case, the system prompts for the
account's password, which may be between 0 and 15 characters.
Alternatively, you can enter the username and password on the
same line.
admin − Name of the administrator account.
opeator − Specify an operator level account.
power-user − Specify an power-user level account.
user − Specify a user account with read-only permissions.
<username 15> − The account username may be between 1 and 15
characters.
password <password_string> {encrypted} - the account password
can be included, and (optionally) can be encrypted.
10