Show Ports - D-Link DGS-1210/ME series Reference Manual

DGS-1210-28P/ME:5#

show ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the configuration of port 8 on the Switch:
DGS-1210-28P/ME:5# show ports 8
Command: show ports 8
Port State/
Type MDI
----- -------
8 Enabled
Auto
DGS-1210-28P/ME:5#
To display the auto negotiation information of ports 1-3 on the Switch:
DGS-1210-28P/ME:5# show ports 1-3 auto_negotiation
Command: show ports 1-3 auto_negotiation
Port Capability
----- ---------------------------------------------------
01 10_half,10_full,100_half,100_full,1000_full
02 10_half,10_full,100_half,100_full,1000_full
03 10_half,10_full,100_half,100_full,1000_full
DGS-1210-28P/ME:5#
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To display the current configuration of a range of ports.
show ports {<portlist> | all} {description | err_disabled |
linkup_time | auto_negotiation | media_type}
The show ports command displays the current configuration of a
port or range of ports.
<portlist> − A port or range of ports whose settings are to be
displayed.
all – Specifies all ports to be displayed.
linkup_time – Specifies to display the linkup time information of
specified ports.
auto_negotiation – Specifies to display the port auto-negotiation
information.
media_type – Specifies to display the media type of the port.
None.
Settings
Speed/Duplex/FlowCtrl
--------------------------------
Auto/Disabled
Connection
Speed/Duplex/FlowCtrl
---------------------------------
Link Down
49
Address
Learning
------------
Enabled